Brass Compression Fittings Newest Price List in 2020

One of the most widely used types of fittings in the industry and building is brass compression fittings, which are manufactured and sold due to their wide application and great advantages in large quantities. These joints are classified into different types according to the type of application, the type of structure and the size. These types of applications are classified into types of brass poly compression fittings for water, gas, and compressed air fittings. The type of fluid flowing in the lines connected to these connections, the type and thickness of the lines and tubes, are the determinants of the type of connection based on the structure. Below we will present the latest price list for brass compression fittings in 2020.

Brass Compression Fittings Newest Price List in 2020

What is the purpose of poly compression fittings?

What is the purpose of poly compression fittings?

blue line poly pipe fittings are the fitting of choice for industrial applications, where blueline PE pipe is carrying media with chemical, compressed air or dirty water. While the poly compression range has been designed for industrial applications it works equally well in any application where blue line PE pipe is used in sizes up to 110mm including irrigation and civil applications.

High-density polyethylene (hdpe to pvc compression fitting) compression fittings provide outstanding physical and performance benefits. Strong and lightweight, HDPE reduces the amount of material used and serves as a greener alternative to heavier metals. Poly compression fittings are an age-old method of joining two pieces of poly pipe together, with an o-ring or bush and a screw cap working together to clamp the pipe ends within the fittings. With a clean pipe and a new fitting, the grip is strongest, and when properly installed, will last for many years without leaking.

Poly compression fittings are available in two main types; metric compression fittings and imperial compression fittings, which are mainly used for rural imperial-sized poly pipe. To view Acu-Tech’s range of rural imperial compression fittings, see this page.

Acu-Tech’s HDPE Plasson poly compression fittings are Australia’s choice for connection of rural class poly pipes. These hdpe mechanical saddle compression fittings are made of high-performance thermoplastic materials, providing long service life and resistance to corrosion. Sourced from Europe’s leading manufacturers such as Plasson, our clients are assured of our fittings’ quality and performance. Acu-Tech’s advantage over other Plasson resellers is our large inventory and buying power, giving you easy access to a wide range of PE compression fittings, at a reasonable rate. 

Acu-Tech poly compression fittings and clamp saddles are designed specifically for connecting polyethylene pipes with an outside diameter from 16 mm to 110 mm (200 mm for clamp saddles). They are compatible with PELD, PEHD, PE40, PE80 and PE100 pipes complying with AS / NZS 4130 Series 1. They are normally used to convey drinking water and fluids at pressures up to 16 bar for generic applications. The quality of the materials used makes these Plasson fittings resistant to etching by numerous chemical substances, and to UV-rays.

The Acu-Tech Universal poly comperession Fitting can be used to connect systems using PE metric piping with existing pipes made of any material, with external diameters of 15-34 mm. Acu-Tech poly compression fittings are very similar in design to SAB poly compression fittings, Plasson compression fittings and Philmac compression fittings, which are designed around similar poly pipe joining principles.

Poly Compression Fittings for Australia

The Philmac Rural range of Australian made compression fittings provides the perfect connection for Australian Rural B Class poly pipe. Installation is easy with a simple to use insert assembly, and the fitting allows for straight forward disconnection and reconnection.

The Philmac Rural compression fitting range has been manufactured from high performance advanced thermoplastic materials so it is resisitant to corrosion and has the strength and durability to provide a long service life.

Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting. The pipe can then be freed.

Philmac Rural inserts are self aligning. Simply bring the insert into the body of the fitting and then tighten the nut with a wrench. As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.

The flat face of the insert allows the installer to tap it into the pipe with ease. Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.

Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.

Rural, Safelok and poly components fittings are all interchangeable as they share a common body.

World’s most famous poly compression fittings

World's most famous poly compression fittings

philmac fittings instructions

The Philmac range of poly compression fittings provides the ultimate solution in connecting blue line polyethylene pipelines for the movement of water from 16mm through to 110mm.

Proudly designed and manufactured right here in world, the Philmac range of poly compression fittings are sold successfully all over the world. Pre-assembled, ready to use and featuring Philmac’s unique Slide & Tighten Technology, Philmac metric fittings make connecting metric poly pipe easier than ever before.

Black polyethylene pipe compression fittings at cheap price

Polyethylene pipe(threaded poly pipe fittings) is a pipe made of polyethylene with polyethylene material and no other additives. Polyethylene and its popularity for water supply. Polyethylene pipes work well in temperate climates and can be used for many years if the requirements for complete installation and engineering are met, without any problems or breakage of the pipes.

Tubing is a polyethylene pipe in that you actually insert a very flexible tube and these tubes can usually be used for irrigation and irrigation. As you know, the main component of the PE pipe is a polymer chain made of ethylene molecules made of carbon and hydrogen. Polyethylene pipes come in a variety of pressure ranges, and buyers make purchases according to their needs.

These advantages have led to the replacement of water and concrete pipes by PE. The main use of PE is for water supply for out-of-town or in-town water transfers. The polyethylene materials used in manufacturing must be different from those used in the manufacture of other polyethylene products. Polyethylene is manufactured and supplied in various grades, each of which is used for different applications.

Due to market fluctuations and changes in raw material prices, we are reluctant to put the price list on the PE pipe site, but you, the respected buyer, can find out all prices with one touch. . Our experts are proud to respond to you dear buyers. We can send you a price list of all types of PE pipes using telegram, whatsapp or fax. We look forward to hearing your warm voice. Quality polyethylene pipes are one of the most important factors in saving and wasting resources, which is one of the highest quality of these pipes internationally.

 

Consideration should be given to purchasing polyethylene pipes and plasson poly pipe fittings for consumables, plant equipment, factory credibility and reputation.

What is the cheapest plastic pipe and fitting?

What is the cheapest plastic pipe and fitting?

Given the increasing use of plastic pipes in the industry and construction of the country, the variety of production and distribution of these pipes with different properties, the choice of suitable plastic pipes for a specific application makes a specialized choice based on knowledge and science. Has become. Since the 1930s, when the Germans first used plastic pipes in building installations and to discharge wastewater, plastic pipes have become widely used today.

These pipes have many advantages over metal pipes. Corrosion resistance, low weight, low deposition on the inner surfaces, easier transportation, easy installation of various types of different properties and even more beauty are the most important uses of these pipes over metal pipes. Slow. Needless to say, there are disadvantages to using these pipes, but the variety of their properties can minimize the disadvantages of using a specimen for a particular application.

Advantages of plastic or polymer tubes

The properties of plastic pipes depend on the working conditions, service specifications and fluid used in the raw material. In general, their most important properties are:

• Resistance to wear and corrosion

In general, plastics and therefore pipes made of it have good resistance to corrosive liquids and gases such as acids and salt solutions, etc. However, this resistance is directly related to the concentration of corrosive materials, temperature and pipe used. Slaves and the type of these fluids. For example, polyethylene pipes can transfer 70% sulfuric acid at 23 ° C.

• Smooth interior wall

Other properties of plastic tubes are their smooth inner wall, which allows them to have low deposition and to avoid the problem of clogging, blockage and pressure drop. These problems are common in metallic pipes, which also cause corrosion and taste of liquids inside the pipe.

• Heat insufficiency

As you know, the heat transfer capability of the plastic pipes is very low, which minimizes the heat loss, but it is worth noting that the high expansion coefficient of the plastic pipes is one of the disadvantages of these pipes. . For example, PVC pipes expand at least five times the size of the steel, causing it to twist along the path that needs to be considered, and consider the necessary arrangements, for example, to extend it further. It requires cost. Plastic pipe tolerances vary between 50 and 150 ° C depending on their type.

• Insufficient electricity

The insulated plastic pipes are protected against electricity and are completely safe from galvanic corrosion, the most common corrosion problem of buried metal pipes in the soil.

• Density of plastic pipes

Plastic pipes are much lighter than steel, concrete and cement pipes. Lightweight reduces their shipping and installation costs and increases performance by several times.

• mechanical properties

PVC pipes have little resistance to forces that can be externally applied. These tubes are not resistant to high temperatures and, if they are too hot, lose their original shape and cause deformation. Also, dry PVC pipes have little resistance to cold and break down in the event of prolonged exposure to cold, so it is quite clear that PVC pipes are a good choice in areas where low air temperatures Is, are not. It is clear that metal crude pipes have higher mechanical strength than plastic pipes, but the greater flexibility of polymer pipes may be a more important and practical feature. Plastic tubes have excellent tensile strength. Nowadays polymers have tried to compensate for the mechanical resistance of plastic pipes. They also increase their resistance by combining metal and plastic in the production of plastic pipes. Thus, a metal layer is inserted between the outer and inner plastic layers of the pipe.

• Flammability

The biggest disadvantage of plastic pipes is its flammability, and since polymers are made of organic matter, mainly petroleum and petrochemicals, they can add fuel to the fire. Not to be outdone, for this great flaw are the ideas that result from fireproof and polymers that smoke rather than flame, which also has its problems.

Also, due to the low wall strength of these pipes, the opening pipe springs should be used for clogging the ducts. In general, the pipes used in petrochemicals for the construction of pipes are thermoplastic and, as the name implies, are solid plastics that can be deformed by heat.

Brass Compression Fittings For Flexible Polyethylene Tube

compression reducing coupler installation technology has several advantages: 

it allows you to create a flexible, rigid connection. Eliminates the need for a full HDPE pipe alignment. Provides complete rigidity of the PE system. No need for welding equipment and special skills available.

The design of PND compression fittings comprises a compartment, a veneer, pressure nuts, o-rings and loops. To produce these elements a polypropylene copolymer, stainless steel resin, food resistant rubber and stainless steel are used. These materials comply with health standards and are suitable for drinking water supply. The connection of HDPE pipes with the help of collapsible compression joints is called because such a design can be assembled several times and separated. To install it is necessary to cut the pipe at the correct angle, detach it and place it in the connection until it stops. Then use a pressure wrench to tighten the compression nut as far as possible. As a result, the loop is tightly fastened to the fixed part and provides a tight connection.

What are the advantages of brass compression fitting?

What are the advantages of brass compression fitting?

One of the most widely used types of fittings in the industry is the brass fittings, which are manufactured and sold because of their wide use and great advantages in large quantities. These joints are classified into different types according to the type of application, the type of structure and the size. These types of applications are classified into types of brass, water, gas, and compressed air connections.

The type of fluid flowing in the lines connected to these connections, the type and thickness of the lines and tubes, are the determinants of the type of connection based on the structure. For example, brass fittings are available in two general types: high pressure and high pressure. If the pressure in the transmission lines is high pressure, the high pressure type is used. High pressure brass fittings benefit greatly from the oil and gas industry. Based on their structure, they pointed to all kinds of brass knees, brass bushes, brass transforms, three-way brass, brass quadrilateral, brass hinge and brass, nipple and brass gear, round left and brass hinge.

The feature of the brass used in these connections

Rice is one of the most widely used alloys due to its physical properties. The melting temperature of brass is very high and the metal, which is a mixture of copper, zinc and other elements with low content, has high mechanical and thermal resistance. It is worn later than other metals and is resistant to corrosion. Also, this type of metal is not stained and opaque and is very suitable for building fittings. The metal’s hot and cold forming ability is excellent and is therefore used in the manufacture of fittings.

Brass Compression Fittings Newest Price List in 2019

Brass poly compression fittings are components used in piping to change direction, branch, pipe diameter or connect two pipes together. In galvanized pipe piping, the most common poly-compression fittings are bush, knee, tee, brain, nail nut, transform and cap, whose material must be galvanized steel according to national building regulations. ) Or hammered cast iron. The following is a list of the latest compression brass fitting lists.

Brass Compression Fittings Newest Price List in 2019

What is the purpose of poly compression fittings?

What is the purpose of poly compression fittings?

A poly compression fitting is a type of coupling used to connect two pipes  to a fixture or valve. It consists of three parts… the compression nut, the compression ring, and the compression reducing coupler seat. As you can see in the diagram at the left, the nut is slid onto the pipe, followed by the compression ring.

The pipe is slid into the fitting (in this case a toilet shutoff valve) and the nut is tightened down. As the nut is tightened, the poly compression ring is pressed into the seat, causing it to compress against the pipe and the compression nut, providing a watertight connection.

Though the primary advantage of poly compression fittings may seem to be in their ease of assembly, their real advantage is in their ease of disassembly! If you look throughout your home, you will see that the use of poly compression fittings is generally limited to appliances and fixtures that will… given enough time, normal use, and wild beatings with a hairbrush… wear out and need to be replaced. Look under your bathroom vanities, behind your toilets, under your dishwasher or behind your refrigerator… and you will see poly compression fittings in flagrante delicto!

In fact, the now ubiquitous use of poly comperession fittings in homes conveniently corresponds with the advent of do-it-yourself , user-friendly fixtures and appliances. After all, if you want to sell faucets to folks with limited skills, you want to make their installation as painless as possible. Ergo, poly compression fittings!

But poly compression fittings have a dark side, and may leak if not used properly. Here are my rules for the use of poly compression fittings. If you don’t follow them, you may regret it!

If you look critically at poly compression fittings, one thing is apparent… they are designed to inhibit the movement of the pipe outward from the fitting. However, they do a poor job preventing the pipe from turning within the fitting. To visualize this, take the example of the connection for a refrigerator icemaker.

Typically, a poly compression fitting is used to connect copper tubing to the icemaker. To prevent the thin 1/4″ tubing from kinking or bending when the refrigerator is pushed back to the wall, an excess of tubing is normally “coiled” behind the refrigerator. This acts like a spring, expanding when the refrigerator is pulled out, and compressing when the fridge is pushed back.

A problem arises if the tubing is not solidly clamped to the rear of the refrigerator. Without this clamping, the tubing creates a rotational stress on the poly compression fitting as the fridge is moved, and can over time cause the tubing to rotate within the fitting, or even loosen the compression nut, causing a “stealth” leak behind the refrigerator. This can be a particularly nasty leak, because it can soak the floor with not evidence until the damage is severe… or until friendly, family-minded carpenter ants find the nice, damp wood!

Another use for poly compression fittings that is a qualified NO is lengthening of pipes using a straight or angled double poly compression fitting (left). About the only time this is acceptable is under a sink, where there is no movement or stress. If there is even a chance that the compression connection will be subjected to rotational movement or impact of any kind, it is better to use a solder, or “sweat”, connection instead.

Each poly compression fitting is a little different in the way it orients itself while tightening… yet sometimes a fitting can be reused. Refrigerator icemaker connections and dishwasher connections are two that come to mind. If you decide to try to make a connection using the existing permanently attached ring and nut, be sure to lubricate the ring and the threads on the compression nut. You will improve your chance of a successful seal..

You can not remove a poly compression ring from tubing once it has been used. If you can’t get a leakproof connection, the tubing behind the ring will have to be cut, and a new ring installed. Though the compression nuts can often be reused, I would recommend against it because the old nut may be slightly deformed and lessen the quality of the new connection.

Poly Compression Fittings for Australia

The range of Philmac Rural poly compression fittings made in Australia offer a perfect fit for Australian class B polyester pipe. It is easy to install using a simple insert assembly and the connections allow disconnection and direct reconnection.

The Philmac fittings instructions range is made from high performance high performance thermoplastic materials, so it is corrosion resistant and is durable and durable for a long service life.

The Philmac Rural can be easily detached and connected by simply loosening the nut and removing it from the body. Then the tube can be released.

The inserts of Philmac Rural are themselves scales. Simply insert the insert into the fuselage housing, then tighten the nut with the wrench. By tightening the nut, he inserts the insert into the body to create an appropriate seal each time.

The smooth insertion face allows the installer to easily attach it to the pipe. As the insert does not need to pass through a joint, there is no risk of damaging the joint during installation.

Philmac Rural has been present on the Australian market for over 20 years and has an excellent operating balance sheet under difficult Australian conditions.

The rural components, Safelok and Poly are all interchangeable because they share a common body.

World’s most famous poly compression fittings

World's most famous poly compression fittings

The range of Philmac connections from poly compression provides the ultimate solution in connecting blue line polyethylene pipelines for moving water from 16 mm to 110 mm.

Proudly designed and built here in the world, Philmac’s range of poly-compression joints has been successfully sold worldwide. Pre-assembled, ready-to-use Philmac metric connectors with unique Slide & Tighten Technology Philmac features make it easy to connect to a metric tube.

Black polyethylene pipe compression fittings at cheap price

PE compression fittings are the type of compression fittings for PE 80 and PE 100 brands. Compression fittings are made of a polypropylene copolymer for casting.

Polyethylene compression fittings with internal and external threads are made in various forms:

compression fittings, tee compression, bending compression and saddle compression bends, compression bends and flange compression fittings. PND compression fittings are produced with a diameter of 16 mm to 110 mm and a working pressure of 10 to 16 atmospheres (bar):

for a diameter of 16 to 63 mm and 16 bar, for a diameter of 75 to 110 mm and 12.5 bar. PND compression fittings are connected to PE pipes by means of a compression loop, which is compressed into a tube. Compression joints for threaded poly pipe fittings are a decay scheme consisting of modular components.

Areas of application of PND compression fittings for connecting and installing PE80 and PE100 grade PE pipes in shifting locations:

rotations and branches, in pipeline diameter changing locations, at joints with Pipe joints, as well as for the transfer of PE pipes from other materials. Compression fittings are used to install and repair PE80 and PE100 grade pipes used in drinking water and technical water supply systems (drinking water and feed pipelines, industrial water in irrigation systems, etc.).

Sealed cables are used. These joints can also be used in any pipeline with the workplace, in which case the chemical resistance of the compression joints is guaranteed. Polyethylene compression fittings are widely used in automatic irrigation systems. The use of compression fittings made of low-pressure polyethylene ensures full thickness between mounted components. Installing small diameter PND poly compression fittings manually without the use of special tools Large diameter is performed using special compression wrench. Compression fittings can be used for PE PE tubes under any weather conditions and freezing temperatures. Compression should be indoors and protected from direct sunlight.

PND Compression Fittings Compression fittings for polyethylene pipes consist of five elements:

1. The bead cap is made of a polypropylene copolymer, intended for removal and displacement, with an internal thread and outer grooves for orientation The screw is comfortable.

2.  The sealing ring is made of polyoxymethylene, prevents the movement and extrusion of the stationary tube, and also prevents spontaneous screws.

3. The press-made sleeve is made of polypropylene copolymer, removes the gasket to a stable position and restricts compression and deformation of the end tube.

4. The sealing ring gasket is made of nitrile rubber, providing reliable tightness to the pipe even when bending.

5. The plasson poly pipe fittings chamber, made of polypropylene copolymer, has a trapezoidal thread for the nut and stop tube insertion.

Key Benefits of Easy Installation:

Installation is quick and unprocessed because the connections are ready to install and require no special skills or additional equipment. Ease of repair: When repairing compression joints, special skills, extras and welding equipment are not required, only a plastic or metal compression wrench is required and the repair itself is done by replacing the internal components of the compression joint.

Multi-Assemblage Separation: Assembling and separating compression joints for HDPE pipes can be performed up to 10 times over and over. Corrosion resistance:

No metal elements in PND compression joints Hygiene:

All parts of the compression joints are made of materials that are suitable for transporting drinking water and food liquids Connecting with other elements:

Compression joints PNDs have standard internal and external threads, so prefabricated elements can be mounted to connect pipes and fittings of different materials.

What is the cheapest plastic pipe and fitting?

What is the cheapest plastic pipe and fitting?

Currently, both natural and synthetic plastics are widely used in industrial joints. Each plastic has different properties depending on its properties and density. Synthetic plastics include polyurethane, PVC, polyamide (nylon) and MDPE, LDP (E), LLDPE, PFTE (polyethylene). Plastic is a lightweight material that does not rust and does not rot, so it is suitable for use underground or outdoors. It is easy to maintain and very flexible compared to metal pipes. It has low thermal and electrical conductivity, so it is resistant to heat.

Since these elements do not contain water-soluble elements, plastics are an excellent material for water storage and transportation, especially electricity and drinking water. In addition, due to its ability to withstand heat, pipes and industrial joints are widely used in the water and wastewater industries. ABS fittings, blue line poly pipe fittings, warheads and plugs, nuts, hoses and pipes, and pipe cover are all commonly used industrial products made of plastic. Plastic pipes and fittings are very popular because they are cheap and easy to cut, but also because of the easy connection using hdpe to pvc compression fitting solvent cement. A properly cemented joint is permanent and is both aeration and pond and takes less than a minute.

Brass Compression Fittings For Flexible Polyethylene Tube

Rice is an alloy of copper and zinc, sometimes containing lead. The metal is very versatile, but is generally more expensive than other materials and is more easily recyclable. Industrial brass fittings are durable and durable.

They are long lasting and survive better in hard conditions than other materials. They are resistant to heat and cold stress and do not rust against corrosive materials. Rice is used in the manufacture of industrial pipes and brass fittings in the plumbing industry because it can withstand high temperatures. Valves – Including compression fittings, valve valves, pipe fittings are some of the items used in the industry to manufacture rice.

Flexible industrial bras fittings:

A hot-rolled brass carbon alloy is often used instead of steel and is cheaper than steel. Flexible brass is a very strong metal with high wear resistance and shock resistance and also has high heat and pressure resistance.

Weldable brass for components in the transportation industry and in the construction of railways and heating, cooling and safety systems, the gas industry and solar heating systems, as well as in the manufacture and design of industrial fittings such as black and galvanized steel pipe fittings, black wire and Galvanized and nut, pipe accessories are also used in galvanized products hdpe mechanical saddle.

What are the advantages of brass compression fitting?

What are the advantages of brass compression fitting?

One of the most used accessories in the industry are brass accessories, which are manufactured and sold in large quantities due to their wide use and great benefits. These compounds are classified into different types according to the type of application, composition and size. These applications are classified into brass, water, gas and compressed air connection types.

These connections determine the type of connection that flows to the lines, the type of lines and pipes and the type of connection according to the thickness structure.

For example, brass fittings are available in two general versions:

high pressure and high pressure. When the pressure is high in the transmission lines, the high pressure type is used. High pressure brass fittings benefit greatly from the oil and gas industry. Due to its structure, they cite all types of brass knees, brass bushings, brass variations, three-way brass, square brass, brass hinge and brass, nipple and brass gear, round left hinge and brass. ۔

Characteristics of the rice used in these compounds:

Rice is the most used compound due to its physical properties. The melting temperature of rice is very high and metal, which is a mixture of copper, zinc and other elements with low components, has a high mechanical and thermal resistance. Later it is used than other metals and is resistant to corrosion. This type of metal is also not moldy and opaque and is very suitable for hitting the construction. Hot and cold metal formulations are excellent and, therefore, are used in the manufacture of accessories.