Best place to buy cheap female pe pipe connector

A tube with a built-in outer wall means a springy shape . There is a set of rows and grooves on its surface. The female to female pe pipe connector can be made of steel or plastics such as high-density polyethylene (H.D.PE) or PVC. It can also be veneered or star-shaped. Polyethylene carbonate pipe is used for applications such as water and wastewater transport, drainage, industrial and infectious sewage transport and running water and even cable and wire routing as well as bridge construction and more recently as valve shielding. flexibility, durability, , reasonable price and lightweight handling are valuable advantages of female pe pipe connector. Below we will talk about the best places to buy cheap female pe pipe connector.

Best place to buy cheap female pe pipe connector

What Are the Dimensions of a female to female pe pipe connector?

  What Are the Dimensions of a female to female pe pipe connector?

We often need to know the dimensions of the inch and metric systems for ordering, buying or comparing the prices of fittings and pipes.

We also need to have the corresponding numbers in this section when using joints such as female or male or knee joints, one side of which is connected to the PE pipe and the other to the galvanized screw connection.

The mm (metric) type of pe pipe connections are attached as follows to the threaded connections.

– The size of 1mm is about 1.5 inches.

– The size of 1mm equals 3.5 inches.

– The size of 1mm is 5 inches.


For example, if you want to connect to a 5-inch polyethylene pipe, you have to order a 5-pipe and a 2-in flange connection, or you have to buy a 5-inch cord when you have a material connection. .

This conversion of numbers and comprehension of corresponding numbers is very practical and is required in many large and small projects by masters, practitioners and purchasers, making it better and more efficient to purchase items efficiently.

All about female to female pe pipe connector and its various types

Archaeological results around Persepolis indicate that ancient Iranians used a variety of pipes and fittings to transport water to other parts of the building. These tubes were usually made of mud or various stones. But over time, pipes and construction fittings took on a new form.

Today, with the advancement of technology and the expansion of the construction industry, various types of modern construction pipes and fittings have been manufactured. The most important thing about modern fittings is their type of design.

Due to the advanced plumbing systems, construction joints also had to be designed to meet the needs. For this reason, any type of plumbing in the building can be used today for its connection.

If you are interested in technical work, you have probably seen brass valves or metal trusses. These fittings are among the first modern fittings to be used extensively in construction. Since metal pipes were very common, metal fittings were also used to connect them. But the huge number of problems with their sealing made engineers thinking of making newer pipes and fittings.

Today, female to female pe pipe connector producer fittings are made of different materials. Polyethylene pipes and fittings are one of the newest construction fittings with unique features. This type of fittings is light weight and easier to install than other pipes and fittings.

The inside of the tubing is also designed to absorb less sediment. So if you are looking for high quality and durable pipes and fittings, it is best to choose polyethylene fittings.

Type of connections:

Knee joints

In piping systems it is sometimes necessary to change the direction of the pipes. Knee types can be used for this purpose. The knees are divided into three categories according to the type of application:

• Conversion elbow: This type of joint is used to divert pipes of different diameters.

• 90 Degree Knee: They are also called the left knee and are used to change the direction of the tubes by 90 degrees.

• 45 Degree Knee: If you want to divert the piping direction to 45 degree, we use the 45 degree knee. In this type of knee, the degree of clamping of the tube is much lower than that of 90 degree knee. Therefore, it is better to use this type of fitting in plumbing systems.

Four-way connections

This type of fitting is also used as a way to divert and extend piping to different areas of the building. The only difference is the increase in the number of branches from three to four, which can have unique applications.

Three way fittings

These types of fittings are very popular and are used in all construction piping systems. The special use of the three-way is to create subdivisions in the main pipeline. These connections allow water to be transported to different areas of the building. The design is divided into three categories, based on the type of design:

• Three way conversion: If we want to divide the tubes of the same diameter we should use three way conversion. These tees also have different threads.

• Vertical tees: If the main pipes are 90 degrees angular and want to diverge, we should use a vertical tee or equivalent tee. The threads of these tees are inward.

• 45 ° Tee: These joints are also used for branching at 45 ° angles.

Types of flanges and washers

Flange is a type of polyethylene plate that can be used to close special plumbing fittings. Washers are also used for sealing flange. Flanges must be installed very carefully because the screws may be damaged if the screws are not sealed properly.

What is the usual size of a female to female pe pipe connector?

 What is the usual size of a female to female pe pipe connector?

The 32mm polyethylene pipe, or 1 inch in diameter, is manufactured at working pressures of 6, 10, 5.12 and 16 atmospheres in 100, 200 and 400 m coils. This size is not made of branched polyethylene pipe.

Polyethylene pipe 32 with international standard seal is able to withstand high pressures that are strong, light and flexible, therefore suitable for urban water supply, building water supply, water transfer to agricultural fields and pressure irrigation, The standard seal is used for the power cable sheath.

It is recommended to use a blue strip with a blue strip for ease of installation, for plumbing and water transfer, especially in rural areas.

The 32 pipe made of PE80 and PE100 is highly resistant to chemicals and weather and is also resistant to sunlight.

Below the weight and thickness of the 32mm polyethylene pipe from pressure 6 atmospheres to 16 atmospheres you can see in the table of PE100, PE80.

The 355mm or 14 inch polyethylene pipe is used as the main pipe for the main water lines.

And along the way this size of polyethylene pipe is split.

355mm polyethylene pipe at operating pressures of 4 atmospheres for sewage and 6 atmospheres, 10 atmospheres and 16 atmospheres for river, sea and general water transfer and conduction in PE80, PE100 tables as branch length branches Polyethylene is manufactured 6 meters and 12 meters.

This size of pipe is used with the same pressure working welded polyethylene fittings and cast iron valves.

A standard seal, production date, soil and water approval, agricultural Jihad, road and water and sewer administration are required on this pipe size.

75 mm polyethylene pipe (2 * 2 inches) with working pressures of 4, 5, 6, 10 and 16 atmospheres is manufactured and supplied in PE63, PE80, PE100 polyethylene table.

Polyethylene pipe of 75 mm size is produced with working pressures of 4 atmospheres and 5 atmospheres and only in branch and along branches of 6 and 12 meters. This pipe is a great offer to female to female pe pipe connector buyers in agriculture.

The 75 mm polyethylene pipe of 6 to 16 atmospheres can be manufactured in branch and coil form (100 m long for each coil).

Application of 75 mm polyethylene pipe:

So the sewage water

Transfer of water to agricultural land

Power Cable Cover

This type of polyethylene tube is produced with a blue stripe or all black.

The 75 mm polyethylene pipe fittings used for conveying water use threaded polyethylene threaded fittings and high pressure polyethylene welding fittings that are proportional to the pipe pressure.

And polyethylene sewer connections are used for 75 sewer pipes.

The 16mm (8.3 inch) polyethylene pipe is the smallest size pipe produced. This tube is only available in 100, 200 and 400 m lengths with 1/4 and 1/2 thickness.

Tube 16 is manufactured in two simple and adipose types with weights of 19, 21 and 25 kg. In polyethylene adhesive pipe dripper intervals are 20, 30 and 50 cm depending on customer’s order, no need for embedded dripper. A very small connector is also used, which can be found at the relevant sites to find the female to female pe pipe connector price in the non-screw type.

The 16mm drip irrigation pipe is used for irrigation, fertilizer transfer and agricultural pesticides to crops, seedlings, trees, etc. to increase irrigation efficiency, increase crop yields, reduce soil erosion and reduce costs. Irrigation fittings are plastic (polymer) droplets that are produced in different colors and used for drip irrigation or sprinkler irrigation.

The working pressure of the size 16 pipe is 4.4 mm, 4 atmospheres and 0.64 g / m. The working pressure of the pipe is 1/2 mm thick, 6 atmospheres and 0.73 g / m.

Before purchasing pipe 16, you need to calculate the area of ​​your farm or garden and specify the number of rows you are considering. In the case of a garden or a greenhouse for growing crops, it is even better to specify the number of trees and shrubs so that you do not have to worry about purchasing pipe size and number of connections.

The country’s water resources constraint has prompted everyone to use the new irrigation systems to help develop the agricultural industry and prevent water loss under drought and drought conditions.

Another use of this product is the injection of slurry into concrete buildings. However, the standard 16-seal polyethylene pipe is used for injecting slurry because these pipes are softer and cheaper and this softness allows the pipe to return to its original shape faster and eat more flexibly.

female to female pe pipe connector Selection Guide For Beginners

Purchasing polyethylene pipe because of its use and significant applications in the industry have tips and tips that if you pay attention to them excellent purchase and your PE pipe will have the best quality and best price and you will save money on the project You’ll notice a lot.

Buying polyethylene pipes can be a daunting task, and you will be faced with obscure information that may not work for you. So here are a few basic points to consider when buying a polyethylene pipe.

First, note that the PE pipe must have a standard designation, a valid brand name, the manufacturer’s name, the date of manufacture, the production line number, the type of PE raw material, the working pressure grade must be inserted on the pipe. And by referring to this information you can get basic information about PE pipe and if you don’t have one, you can buy PE pipe. So if you want to female to female pe pipe connector uses, consider these.

Polyethylene pipes are manufactured in Iran according to the standard of INSO 14427-2 of the National Institute of Standards of Iran. Formerly DIN 8074 was the German reference standard and at that time there was no national standard for polyethylene pipes that has been resolved in recent years but still this standard and their tables can be a reference for you but are not valid in reference laboratories and quality control.

Cheapest wholesale place to buy female to female pe pipe connector

 Cheapest wholesale place to buy female to female pe pipe connector

Safa Polyethylene Pipe & Pipe Fittings Trading Center (Karogit Pipe, Spiral Pipe, Pipe Fittings, Pipe Fittings, etc.) Based on years of technical experience and engineering knowledge in producing, manufacturing, selling and supplying all kinds of pipes Polyethylene, polyethylene welding machines, polyethylene fittings, polyethylene manholes, polyethylene flanges, design and implementation of water and wastewater systems in industrial and agricultural projects with the best price and quality.

This polyethylene pipe and fittings sales center in Tehran, in collaboration with reputable international companies and the experience of local craftsmen with the knowledge of the day, has been able to supply the required water, wastewater, oil and gas projects with superior quality and competitive provide price for female to female pe pipe connector sellers.

The most important properties of polyethylene pipes and fittings:

Light weight and long life High corrosion resistance, UV radiation, high impact resistance and wear Chemical wearability, fast installation and execution

Also, the center of Tehran Polyethylene Pipe and Fittings seeks to provide your customers with the best quality, standard service and reasonable price. The products of this company come to you from the best raw materials and after the quality control of our experts.

female to female pe pipe connectorfor export at affordable price

From the very beginning, the Iranian factory manufactured high quality standards for exporting polyethylene pipes to the countries of the region. These factories, along with the PE industry, have imported the most modern and production machinery from Germany (PE production line) and have updated their machinery at any particular time.

Iranian companies have produced exemplary products in the region as an exemplary and exemplary role model for other manufacturing units. As a successful exporter, they have been able to export their products to various countries and have exported polyethylene pipe proudly. Made in Iran.

Exports have been and are still very difficult, competitors in the global range of products require world-class quality, exporting PE is much more difficult than other products, in the Middle East region through one of the main centers of oil extraction and oil derivatives producers. The names are there, and exporting PE to the countries of these hard-working competitors is difficult with the leadership of managing and producing quality products.

Iranian companies have produced exemplary products in the region as an exemplary and exemplary role model for other manufacturing units. As a successful exporter, they have been able to export their products to various countries and have exported polyethylene pipe proudly. Made in Iran.

Exports have been and are still very difficult, competitors in the global range of products require world-class quality, exporting PE is much more difficult than other products, in the Middle East region through one of the main centers of oil extraction and oil derivatives producers. The names are there, and exporting PE to the countries of these hard-working competitors is difficult with the leadership of managing and producing quality products

Top 5 female to female pe pipe connector exporting countries

Top 5 female to female pe pipe connector exporting countries

The export share of the Tubular Code 06 73 in the global market is over $ 78.3 billion. The largest exporting countries are China, Italy, Germany, America and Iran. The growth of pipe exports in the last three years is more than 25% higher. The pipes also include the 7303 to 7307 tariff code. Manufacturers of this product have been able to export their products to international markets by applying marketing and packaging principles.