Electrofusion fittings Price Fluctuation in 2020

Polyethylene electro-fusion fittings are  The way it works and how it is done is that they use electricity for this purpose. Using the electric current, the heaters and internal electrofusion fittings elements of the connections are heated, and thus the polyethylene electrofusion connections are made. 

Electrofusion fittings Price Fluctuation in 2020

Purchase guide for electrofusion fittings

Purchase guide for electrofusion fittings

Using polyethylene electrofusion fittings, it is possible to connect different types of HDPE and MDPE pipes and other plastic pipes that have electric heating elements. If necessary, a clip can be used for this purpose. And then a voltage of about 40 watts is used depending on the type of connection. 

The use of this type of connection is abundant in gas supply and water supply lines. electrofusion fittings for water Because their reliability is high, they  Even these types of connections have IGS certification. Since the use of this method causes us not to suffer from other limitations of the connection and welding methods, it is more applicable in this field. 

What are the benefits of polyethylene electrofusion joints? The use of polyethylene electro-fusion fittings is highly safe and repairs and existing barriers are eliminated  Using this method, connections can be made in less time and faster. This type of connection and welding has a high chemical resistance. Another advantage is its flexibility and lightness. It will be safe from corrosion and rust. It is very easy to install and the probability of error and error is zero. Prevents water and gas loss in water supply and gas supply networks.After boiling, a smooth surface is obtained. It can be easily cleaned. Contamination is prevented from entering the welding area. It also prevents damage and obstacles.

Price changes of electrofusion fittings in 2020

Price changes of electrofusion fittings in 2020

What should we consider when connecting polyethylene electrofusion? Note that during electro-fusion polyethylene connections, heat the heat evenly over the welding surface. Carefully monitor and monitor the pressure and temperature of electrofusion fittings price list the melted area. When welding, be careful not to damage the coupling coil. Perform the necessary protection before, after and during the connection operation electrofusion fittings for water. Consider a good time for electrophoresis.  Remove any contamination and contamination before welding. Check the connection piece first to make sure it is clean and free of contamination on the surface. Clean the part of the pipe that has been shaved with materials such as ISO propane. When cutting the pipe, make sure to cut it vertically on its axis and clean and electrofusion fittings price list clean the two ends of the pipe that have been cut and will have roughness with a sandpaper. 

Always consider the necessary controls for welding time and voltageTo increase the traction of the polyethylene electro-fusion joints, hold the part firmly inside the clamp.

0 replies

Leave a Reply

Want to join the discussion?
Feel free to contribute!

Leave a Reply