Heavy Duty Polyethylene Pipes (HDPE) are used in a wide range of urban, industrial, marine, drilling, landfill and agricultural pipelines. Proper use of these pipes has been tested and proven in situations such as land surface, buried, floating and submarine surfaces. These pipes are capable of transporting drinking water, sewage, chemicals, slurry, and hazardous waste and compressed gases. This is why it is becoming more and more common to use these pipes day by day, so it is important for the main consumers of this type of pipe to be more familiar with the types of pipes and the type of fittings suitable for them. HDPE fittings, pipes are required for a variety of fluid transfer projects and need to be selected and used to suit their performance.
Best buyers of pipes and fittings from Iran
There are usually several countries in the group of the best buyers of pipes and fittings from Iran who buy various types of Hdpe pipe compression fittings and PVC pipes from the best Iranian major manufacturers at reasonable prices.
These major buyers have many reasons to choose from in this country for their wholesale purchases, the simplest of which are some of the biggest advantages of buying from these markets:
- Easy access to hdpe pipe manufacturers
- Cheap and affordable price for all kinds of hdpe pipe and PVc\C pipes
- High quality and easy installation of these tubes and high pressure connections and their high performance
- High standard of all types of plastic pipes available in this market.
- Most importantly, it is easy to transport these products purchased from markets in the country.
Despite such special services offered to major buyers in the Iranian market for all types of pipes and fittings made in Iran, these buyers will usually not replace other market and will remain the loyal customers of this market.
In general, any success in the business of a product will create a sense of loyalty to the customer, which will be achieved through honest and quality service.
Why Iranian plastic pipes have affordable prices?
You might also be wondering why Iranian plastic pipes have affordable prices?
In order to give a correct answer to this question, it is necessary to examine the production of this country in general from various points of view. As you know, all kinds of plastics, especially plastics used in the production of all kinds of pipes and fittings, are oil derivatives and Iran is one of the largest oil producers and oil derivatives in the world.
For this reason, because of the quick and easy access to the raw materials needed in the production of plastic pipes, it is less costly to supply the raw materials and as a result, this product is produced in the IRA market at lower costs.
Other reasons that make the market for PE and pipe fittings a major bargain are the geographical location of the country and the existence of short and fast links between its markets and most of the world markets that transport these products. Manages with lower costs.
Manpower is also cheaper in the Iranian market than in other markets. Along with all of this, the highest quality and the best of the world standards for this product make buying from this market in every way affordable.
That’s why when you visit the Iranian market after ordering you will find a cheap and inexpensive Hdpe pipe fittings price list that will make your shopping enjoyable in Iran.
Pipes wholesale distribution companies in Iran
Wholesale pipe distribution companies in Iran are widely active in domestic and foreign markets. That is why it is easy to access these centers for bulk purchases at affordable prices.
One of the benefits that a major distribution center can offer to its major buyers is the easy accessibility that will make its buyers comfortable and secure.
In the market of high pressure pipe and fittings, supplying quality products at world-class standards at affordable prices is something that no manufacturer can do.
But most Iranian manufacturers can easily meet the needs of global markets for these products by utilizing sophisticated production lines in the mass production of all kinds of fittings to meet the needs of their customers.
Iran, due to its raw material supply resources, all kinds of high pressure plastic pipes can continue to operate in the near and far distribution of these products.
It is interesting to note that this country, as mentioned earlier, also has extensive facilities in terms of communication and freight routes, and has short, convenient routes for its commercial communications. This makes purchasing from major distributors of pipes and fittings in Iran highly economical.
Which is better? Iranian pipes or Chinese pipes?
Many major buyers who go to foreign markets to buy the types of pipes and fittings offered in these markets will definitely ask themselves which is better? Iranian pipes or Chinese pipes
In response to these dear ones, different things must be considered to suit the buyer’s own circumstances. Examples to consider in answering such a question are:
- Distance of origin to destination for transportation of purchase products.
- Quality required by the buyer for the type of application that these products will have.
- Investigate the type of transfer routes from the source market to the destination market and its current costs.
These may not seem important at first glance, but they will greatly affect your major purchase costs. Distance to destination and transit routes are important things that can even affect the quality of your purchase along with its price.
There is also the fact that China is producing different quality products depending on the buyer’s budget. That is, the more money you pay to buy from Chinese manufacturers as a result, they produce a higher quality product for you.
While Iranian manufacturers produce their products in line with international standards and offer them at affordable prices for sale in world markets. As production costs are low in Iran, you will achieve a higher quality of Iranian products at a cheaper price.
While purchasing from Chinese markets, the quality of your products is commensurate with the amount of budget you pay, which may be in violation of your country’s international standards.
View Specifications & Details of Hdpe Pipes
The growing trend in the use of plastics and in particular polyethylene in the industry is due to the properties and characteristics of these materials and their applications, which has made a remarkable improvement in production and utilization in various industries over a short period of time. To be a witness.
Over the past fifty years, the industry has introduced itself as a viable replacement for PVC, GRP and cast iron pipes, and has been able to replace it in most cases as a substitute for Hdpe pipes and fittings. Make your own such pipes. HDPE pipe specifications that extend its use in many projects include:
- Easy installation and running and easy shipping
- Resistance to chemicals
- Low weight
- High strength and flexibility and stress tolerance
- No leakage
- Impact Resistance
- Wear resistant
- Resistant to rodent and microorganism attack
- No cathodic protection and protection required
- Having a long life
- Resistant to organic solvents
- UV resistant
- Cold and heat resistant
- Ability to use a variety of connections
The mechanical properties of Hdpe are dependent on three parameters: time, heat and pressure. Thus, in calculations for Hdpe pipe connection design, the mechanical properties are always determined by long-term tests and are necessarily divided into a factor called a safety factor.
Which is more durabel? PVC pipe or PE pipe?
Other questions that may be posed to a novice buyer in the pipe and fittings market are which one is more durabel ? PVC pipe or PE pipe?
Such a question usually exists for those buyers who only want to trade this product and are not the consumer themselves. To this end, it is important to know that these tubes have been examined and compared in various respects:
- The creep and tensile strength of the tubes were studied.
- Flexural loading and compressive strength were performed.
- Impact strength was evaluated.
- Environmental compatibility of these products was evaluated.
- Chemical resistance was evaluated.
- Appropriate bedding conditions were studied to control the loads against external loads.
- The ease of fitting and fitting was also evaluated.
- Floating and executing offshore projects
- The effect of scratching was investigated.
- Ease of transportation.
- Sunlight effect.
With this factor in mind, the end result was that the PE pipes showed a better specification, which would make them easier to use for projects and less likely to harm project managers. They are also more economical.
Wholesale price of HDPE pipes in Iran’s market
There has been much talk about the wholesale price of HDPE pipes in Iran, and it has been found that the price list for all types of PE pipes and fittings in the Iranian wholesale markets is very affordable and inexpensive.
This low price while the quality of PE and pipe fittings is world-class and comparable to the top brands producing these products in various global markets.
Iranian manufacturers use all kinds of pipes and fittings using the best raw materials suitable for the production of these products and in the best equipped and advanced production lines with the help of the professional workforce produce these products at the best quality and as the world standard.
Polyethylene pipes and fittings in different dimensions are very effective in different projects. Due to their high quality and durability, these pipes are getting more and more attention from executives in the fluid transfer projects.
As a result, in today’s wholesale markets, the major need is to supply these products in bulk, with efficient performance and affordable prices. This will naturally be done with the help of all the leading manufacturers around the world. In this regard, Iranian manufacturing groups are among the active wholesale groups in the world markets that you can go to these loved ones for a quality and affordable purchase.
Common types of hdpe pipes for homes
Currently plastic pipes are one of the most common water and sewage conveyor pipes. Different types of pipes can be used for water piping and building installations, which are briefly described in this section.
The pipes used in the building plumbing show different mechanical properties based on the material and technology of construction and are used in different cases.
Layered Tube (Super Pipe): By combining different materials in a layered form, a type of composite pipe is made available under the brand of Super Pipe. Their combination results in the mechanical advantages of each material in this type of pipe and avoids its disadvantages.
Examples include high strength, high flexibility, fast installation, low deposition and corrosion, etc. Nowadays, this type of pipe is very common in building installations and plumbing.
In hot and cold water piping of buildings, water usually enters the dividing pipe from one main branch, and then enters multi- or single-unit buildings by one or more separating paths, and the hot and cold water divisions consumed, for Entry to each unit is considered.
The advantages of using PEX-AL-PEX five-layer pipes are due to the existence of multiple ramifications in water piping, especially in large residential and commercial complexes, as well as the necessity of high pipe stability and durability and low costs. Explained as follow:
- High mechanical strength
- Easy plasticity
- Long coat length
- Less waste than other types
- Significant reduction in connection usage
- High installation speed
- Long life span
- Cost savings
- Lack of oxygen penetration and oxidation of facilities
Are HDPE pipes safe for drinking water?
As you know, high pressure polyethylene pipes are used extensively in large projects to transport all kinds of liquids. The main uses of these plastic pipes are:
- Application at sea
- Application in sewage transport
- Use of PE in gasification
- Use them in firefighting
- Use as a power cord and telecommunication cover
- Used in air conditioning and ventilation systems
- Use of pressure irrigation systems
Polyethylene pipe can transport drinking water, sewage, chemicals, slurry and hazardous waste and compressed gases.
Considering the remarkable benefits of these pipes, it has led managers and executives of Pars Ethylene Kish water supply pipeline project managers to replace metal and concrete pipes. Polyethylene pipes are also widely used in drinking water systems as they are not attacked by micro-organics.
The use of polyethylene pipes for the transport of drinking water maintains the health of this water and for drinking water transmission projects in distant and near locations due to its good strength and flexibility it is a better option than other types of pipes used in These are kind of projects.
How to install plastic pipes in shortest time?
As you know, polyethylene pipes are made of polyethylene raw materials; they are thermoplastic and, therefore, subject to heat, deformed and returned to their original state after being cooled. Due to this property of polymer materials, polyethylene pipes can be easily bonded together.
There are generally two ways to connect polyethylene pipes:
- The first method is welding
- The second method is mechanical fitting
Welding methods are methods in which two ends of the PE pipe are connected by a welding machine. In mechanical joints, coupling or pressure flanges and joints are used to connect two polyethylene pipes.
Both methods of fitting for polyethylene pipes require their own durations, each depending on the type of project required. As a result, each of these methods can be the fastest method of connecting the Yatylene bridge pipes to suit the type of project required.