One of the most widely used types of fittings in the industry and building is brass compression fittings, which are manufactured and sold due to their wide application and great advantages in large quantities. These joints are classified into different types according to the type of application, the type of structure and the size. These types of applications are classified into types of brass poly compression fittings for water, gas, and compressed air fittings. The type of fluid flowing in the lines connected to these connections, the type and thickness of the lines and tubes, are the determinants of the type of connection based on the structure. Below we will present the latest price list for brass compression fittings in 2020.
What is the purpose of poly compression fittings?
blue line poly pipe fittings are the fitting of choice for industrial applications, where blueline PE pipe is carrying media with chemical, compressed air or dirty water. While the poly compression range has been designed for industrial applications it works equally well in any application where blue line PE pipe is used in sizes up to 110mm including irrigation and civil applications.
High-density polyethylene (hdpe to pvc compression fitting) compression fittings provide outstanding physical and performance benefits. Strong and lightweight, HDPE reduces the amount of material used and serves as a greener alternative to heavier metals. Poly compression fittings are an age-old method of joining two pieces of poly pipe together, with an o-ring or bush and a screw cap working together to clamp the pipe ends within the fittings. With a clean pipe and a new fitting, the grip is strongest, and when properly installed, will last for many years without leaking.
Poly compression fittings are available in two main types; metric compression fittings and imperial compression fittings, which are mainly used for rural imperial-sized poly pipe. To view Acu-Tech’s range of rural imperial compression fittings, see this page.
Acu-Tech’s HDPE Plasson poly compression fittings are Australia’s choice for connection of rural class poly pipes. These hdpe mechanical saddle compression fittings are made of high-performance thermoplastic materials, providing long service life and resistance to corrosion. Sourced from Europe’s leading manufacturers such as Plasson, our clients are assured of our fittings’ quality and performance. Acu-Tech’s advantage over other Plasson resellers is our large inventory and buying power, giving you easy access to a wide range of PE compression fittings, at a reasonable rate.
Acu-Tech poly compression fittings and clamp saddles are designed specifically for connecting polyethylene pipes with an outside diameter from 16 mm to 110 mm (200 mm for clamp saddles). They are compatible with PELD, PEHD, PE40, PE80 and PE100 pipes complying with AS / NZS 4130 Series 1. They are normally used to convey drinking water and fluids at pressures up to 16 bar for generic applications. The quality of the materials used makes these Plasson fittings resistant to etching by numerous chemical substances, and to UV-rays.
The Acu-Tech Universal poly comperession Fitting can be used to connect systems using PE metric piping with existing pipes made of any material, with external diameters of 15-34 mm. Acu-Tech poly compression fittings are very similar in design to SAB poly compression fittings, Plasson compression fittings and Philmac compression fittings, which are designed around similar poly pipe joining principles.
Poly Compression Fittings for Australia
The Philmac Rural range of Australian made compression fittings provides the perfect connection for Australian Rural B Class poly pipe. Installation is easy with a simple to use insert assembly, and the fitting allows for straight forward disconnection and reconnection.
The Philmac Rural compression fitting range has been manufactured from high performance advanced thermoplastic materials so it is resisitant to corrosion and has the strength and durability to provide a long service life.
Philmac Rural can be easily disassembled and reconnected simply by loosening the nut and taking the insert out of the body of the fitting. The pipe can then be freed.
Philmac Rural inserts are self aligning. Simply bring the insert into the body of the fitting and then tighten the nut with a wrench. As the nut tightens it will draw the insert into the body of the fitting to create the perfect seal every time.
The flat face of the insert allows the installer to tap it into the pipe with ease. Because the insert does not need to pass over a seal there is no risk of damaging the seal during installation.
Philmac Rural has been a market leader in Australia for over 20 years, with a strong track record of performance in tough Australian conditions.
Rural, Safelok and poly components fittings are all interchangeable as they share a common body.
World’s most famous poly compression fittings
philmac fittings instructions
The Philmac range of poly compression fittings provides the ultimate solution in connecting blue line polyethylene pipelines for the movement of water from 16mm through to 110mm.
Proudly designed and manufactured right here in world, the Philmac range of poly compression fittings are sold successfully all over the world. Pre-assembled, ready to use and featuring Philmac’s unique Slide & Tighten Technology, Philmac metric fittings make connecting metric poly pipe easier than ever before.
Black polyethylene pipe compression fittings at cheap price
Polyethylene pipe(threaded poly pipe fittings) is a pipe made of polyethylene with polyethylene material and no other additives. Polyethylene and its popularity for water supply. Polyethylene pipes work well in temperate climates and can be used for many years if the requirements for complete installation and engineering are met, without any problems or breakage of the pipes.
Tubing is a polyethylene pipe in that you actually insert a very flexible tube and these tubes can usually be used for irrigation and irrigation. As you know, the main component of the PE pipe is a polymer chain made of ethylene molecules made of carbon and hydrogen. Polyethylene pipes come in a variety of pressure ranges, and buyers make purchases according to their needs.
These advantages have led to the replacement of water and concrete pipes by PE. The main use of PE is for water supply for out-of-town or in-town water transfers. The polyethylene materials used in manufacturing must be different from those used in the manufacture of other polyethylene products. Polyethylene is manufactured and supplied in various grades, each of which is used for different applications.
Due to market fluctuations and changes in raw material prices, we are reluctant to put the price list on the PE pipe site, but you, the respected buyer, can find out all prices with one touch. . Our experts are proud to respond to you dear buyers. We can send you a price list of all types of PE pipes using telegram, whatsapp or fax. We look forward to hearing your warm voice. Quality polyethylene pipes are one of the most important factors in saving and wasting resources, which is one of the highest quality of these pipes internationally.
Consideration should be given to purchasing polyethylene pipes and plasson poly pipe fittings for consumables, plant equipment, factory credibility and reputation.
What is the cheapest plastic pipe and fitting?
Given the increasing use of plastic pipes in the industry and construction of the country, the variety of production and distribution of these pipes with different properties, the choice of suitable plastic pipes for a specific application makes a specialized choice based on knowledge and science. Has become. Since the 1930s, when the Germans first used plastic pipes in building installations and to discharge wastewater, plastic pipes have become widely used today.
These pipes have many advantages over metal pipes. Corrosion resistance, low weight, low deposition on the inner surfaces, easier transportation, easy installation of various types of different properties and even more beauty are the most important uses of these pipes over metal pipes. Slow. Needless to say, there are disadvantages to using these pipes, but the variety of their properties can minimize the disadvantages of using a specimen for a particular application.
Advantages of plastic or polymer tubes
The properties of plastic pipes depend on the working conditions, service specifications and fluid used in the raw material. In general, their most important properties are:
• Resistance to wear and corrosion
In general, plastics and therefore pipes made of it have good resistance to corrosive liquids and gases such as acids and salt solutions, etc. However, this resistance is directly related to the concentration of corrosive materials, temperature and pipe used. Slaves and the type of these fluids. For example, polyethylene pipes can transfer 70% sulfuric acid at 23 ° C.
• Smooth interior wall
Other properties of plastic tubes are their smooth inner wall, which allows them to have low deposition and to avoid the problem of clogging, blockage and pressure drop. These problems are common in metallic pipes, which also cause corrosion and taste of liquids inside the pipe.
• Heat insufficiency
As you know, the heat transfer capability of the plastic pipes is very low, which minimizes the heat loss, but it is worth noting that the high expansion coefficient of the plastic pipes is one of the disadvantages of these pipes. . For example, PVC pipes expand at least five times the size of the steel, causing it to twist along the path that needs to be considered, and consider the necessary arrangements, for example, to extend it further. It requires cost. Plastic pipe tolerances vary between 50 and 150 ° C depending on their type.
• Insufficient electricity
The insulated plastic pipes are protected against electricity and are completely safe from galvanic corrosion, the most common corrosion problem of buried metal pipes in the soil.
• Density of plastic pipes
Plastic pipes are much lighter than steel, concrete and cement pipes. Lightweight reduces their shipping and installation costs and increases performance by several times.
• mechanical properties
PVC pipes have little resistance to forces that can be externally applied. These tubes are not resistant to high temperatures and, if they are too hot, lose their original shape and cause deformation. Also, dry PVC pipes have little resistance to cold and break down in the event of prolonged exposure to cold, so it is quite clear that PVC pipes are a good choice in areas where low air temperatures Is, are not. It is clear that metal crude pipes have higher mechanical strength than plastic pipes, but the greater flexibility of polymer pipes may be a more important and practical feature. Plastic tubes have excellent tensile strength. Nowadays polymers have tried to compensate for the mechanical resistance of plastic pipes. They also increase their resistance by combining metal and plastic in the production of plastic pipes. Thus, a metal layer is inserted between the outer and inner plastic layers of the pipe.
The biggest disadvantage of plastic pipes is its flammability, and since polymers are made of organic matter, mainly petroleum and petrochemicals, they can add fuel to the fire. Not to be outdone, for this great flaw are the ideas that result from fireproof and polymers that smoke rather than flame, which also has its problems.
Also, due to the low wall strength of these pipes, the opening pipe springs should be used for clogging the ducts. In general, the pipes used in petrochemicals for the construction of pipes are thermoplastic and, as the name implies, are solid plastics that can be deformed by heat.
Brass Compression Fittings For Flexible Polyethylene Tube
compression reducing coupler installation technology has several advantages:
it allows you to create a flexible, rigid connection. Eliminates the need for a full HDPE pipe alignment. Provides complete rigidity of the PE system. No need for welding equipment and special skills available.
The design of PND compression fittings comprises a compartment, a veneer, pressure nuts, o-rings and loops. To produce these elements a polypropylene copolymer, stainless steel resin, food resistant rubber and stainless steel are used. These materials comply with health standards and are suitable for drinking water supply. The connection of HDPE pipes with the help of collapsible compression joints is called because such a design can be assembled several times and separated. To install it is necessary to cut the pipe at the correct angle, detach it and place it in the connection until it stops. Then use a pressure wrench to tighten the compression nut as far as possible. As a result, the loop is tightly fastened to the fixed part and provides a tight connection.
What are the advantages of brass compression fitting?
One of the most widely used types of fittings in the industry is the brass fittings, which are manufactured and sold because of their wide use and great advantages in large quantities. These joints are classified into different types according to the type of application, the type of structure and the size. These types of applications are classified into types of brass, water, gas, and compressed air connections.
The type of fluid flowing in the lines connected to these connections, the type and thickness of the lines and tubes, are the determinants of the type of connection based on the structure. For example, brass fittings are available in two general types: high pressure and high pressure. If the pressure in the transmission lines is high pressure, the high pressure type is used. High pressure brass fittings benefit greatly from the oil and gas industry. Based on their structure, they pointed to all kinds of brass knees, brass bushes, brass transforms, three-way brass, brass quadrilateral, brass hinge and brass, nipple and brass gear, round left and brass hinge.
The feature of the brass used in these connections
Rice is one of the most widely used alloys due to its physical properties. The melting temperature of brass is very high and the metal, which is a mixture of copper, zinc and other elements with low content, has high mechanical and thermal resistance. It is worn later than other metals and is resistant to corrosion. Also, this type of metal is not stained and opaque and is very suitable for building fittings. The metal’s hot and cold forming ability is excellent and is therefore used in the manufacture of fittings.