Posts

6 Inch PE Pipe Couplinsg & Fittings with Discounted Prices

Pipe and fittings market is one of the most hot and important topics in Iran. Pipe and fittings are one of the most important factors in construction and in Iran everything related to construction and its subsidiaries. It is very important for everyone. So the pipe and fittings market is no exception and it is very important for those who work in the field. They follow the market price of pipe and fittings daily.For more information on PE pipe and fittings such as 6 inch pe pipe coupling, follow us on below article …

6 Inch PE Pipe Couplinsg & Fittings with Discounted Prices

Is Electrofusion Coupling So Expensive?

Is Electrofusion Coupling So Expensive?Electrofusion fittings are a variety of fittings that can be used in gas poly pipes and water supply lines. In electro-fusion joints, the heating method is compared to the butt fusion welding methods and the electric current is used to generate heat. This method is the only type of connection approved by the IGS standard for gas transmission lines due to its high safety. Using this method we can create different polyethylene pipe fittings such as pipe – pipe, pipe – knee, pipe – bushing (for example in changing pipeline diameter) and so on.


Therefore, the method of butt welding of polyethylene does not limit the connection of tubes of similar sizes. Experience has also shown that polyethylene pipes with different types of polyethylene are also possible in this method. In addition to its safety, other advantages of this method are its high speed and clean connection. But on the other hand, the limitation of this method is the high cost and maximum diameter of the pipe that can be connected with this method.

Are there any pipe and fitting producers in India?

Manufacturers of polyethylene pipes directly distribute these types of pipes in the best quality throughout the country and provide good service to customers. Among the pipes producing plants in Iran, the leading producer of all types of pipes and fittings may have a well-known brand. This manufacturer uses the best raw materials to produce these pipes. Also keep in mind that the PE pipe may produce different qualities than the pipes, if hdpe pipe prices are different. These tubes are very versatile and are designed to be used in many industries.


In the big city of Mashhad you can buy different types of standard PE pipes from the market. Polyethylene pipe factory sales and distribution in Mashhad are very high. Due to the high pressure and elasticity of this product, its sales are very high and due to its many advantages, customers buy these tubes more. The hdpe pipe pe 63 specification as follows:

  • Suitable flexibility
  • Light weight
  • long life
  • High temperature resistance
  • Pressure tolerance
  • High strength

Various types of PE pipes are available at affordable and economical prices in the market. If you buy these tubes in bulk you can pay a lower price.

PE Pipe and Fittings Manufacturing Process

PE Pipe and Fittings Manufacturing Process Making polyethylene fittings is a bit more difficult than producing polyethylene pipes, and requires different welding equipment and devices, and the manufacture of polyethylene fittings, as well as the welding machine operators must be trained and skilled in the manufacture of polyethylene fittings.


Making PE connections is a simple, time-consuming but accurate process. Pre-manufactured and high quality polyethylene pipe is selected according to the required standards and is made by special saws into the required parts and should be made by these saws if the pipes head needs angular. The cutting of different angles of the PE should be done with special saws that have a consistent angle and precision.


Production of PE connections After cutting the PE pipe reaches the parts required to reach its critical stage, the cut parts are placed in welding machines for the type of PE connection. Note that the PE welding machine must be compatible with the diameter of the pipe and the type of connection to be made and the size of the PE pipe should not exceed the welding capacity of the welding machine and its molds and jaws.


The cut parts of the PE pipe after being fitted into the welding machine, the two ends of the pipe are first smoothed, smooth and polished with a special cleaning fluid free of any grease or contamination, and the hot plate is inserted between the parts and two The pipe head is applied to a specified pressure at a specified time. (The amount of pressure and time of this pressure on the hot plate depends on the size of the pipe and the PE connections as well as the thickness of the pipe and each welding machine has its own welding and tabular guide.)


The hot plate is removed and immediately the two ends of the high volume tapping tee are pressed against each other and for a certain time a high pressure is applied to make the welding work properly, after the time and pressure applied according to the welding guide, the pressure from the joints. It is under construction and it is time to cool down and in the meantime the pressure is lowered and should be considered when producing the pressure and size of the connections It depend pass.


The above fitting method described above should be repeated for each welding angle and point, for example a polyethylene knee consisting of 4 welds has 3 welding points and the above steps are repeated 3 times to produce a polyethylene knee. .


The production of PE connections is influenced by three factors:


1- Quality of PE pipe

Quality of PE pipe used in the manufacture of fittings as the main material for the production of fittings which is clear and obvious and to have a good and quality product must use quality raw materials and to have quality and reliable connections PE should be used. At first they should be of good quality.


2- Cutting equipment and PE welding machines

Polyethylene pipe welding and cutting equipment for the production of polyethylene fittings must be properly and carefully positioned so that the parts are properly welded together and minimize manpower interference if possible to minimize manpower error. It should also be reduced and welding machines and PEs should have a memory slot to store operation information and how they can be manufactured so that they can be checked if needed.


3- Skill of operator and welder of PE pipe and fittings

Maitre’s polyethylene fittings must be operated under the supervision of the operator with the intervention of manpower, and the skill and experience of the operator and technician are of paramount importance and the operator must be fully familiar with the operation of the ship, adhere to safety standards and welding standards. And pipe welding instructions and PEs have complete mastery.

How to buy 6 inch pe pipe coupling directly from manufacturers?

Of the pipes available, polyethylene pipes are the best type and have many types. Polyethylene pipe without intermediate is one of several types of pipe. Polyethylene pipe without intermediate can be sold in bulk. One of the most widely used products for water transfer is polyethylene pipe. Intermediate polyethylene pipes are one of the most specialized polyethylene pipes. One of the ways of selling intermediate polyethylene pipes is that many companies wholesale this product.


Polyethylene pipe is one of the most used pipes in this land. This pipe model has good advantages. The pipes are very tight and fit and are widely used. This pipe is used for urban and rural sewage and water conveyance. Polyethylene tubes are mass-produced without intermediates. The durability of these tubes is high and can withstand a lot of pressure.


Polyethylene pipes of all kinds have a major consumer appeal. Wholesale has many benefits including:

  • Tangible decline in prices
  • Reduce other hassles such as commuting and shipping costs
  • Saving time
  • Order at any desired amount
  • By purchasing polyethylene pipes from the desired production in large quantities, good profit can be achieved.


In-store stores can be purchased in bulk in person. In online stores, this product can mainly be bought and consumed without the intermediate PE pipe. Wholesale makes this product. Buy and sell polyethylene pipes for those who buy and sell wholesale from factories in large numbers at the factory’s own price. There are cities for sale without intermediate polyethylene pipes that make it easy for buyers to buy high quality Yi are for sale which is an important reason for using this product.

HDPE Pipe Connections in different sizes

HDPE Pipe Connections in different sizes 6 hdpe pipe rolls production line is active by numerous factories in Tehran. At PE mills, we produce all kinds of PE pipes for different and high quality applications. The following industries and locations are the most widely used polyethylene pipes in different sizes:

  • Sewer lines
  • wATERING systems
  • Agriculture
  • transferring water
  • Gas transmission
  • Power cable or telecommunication sheath

Why the factories nowadays have increased the production of 6 inch hdpe pipe dimensions. With increasing population in cities as well as increasing water consumption, traditional water storage and transport methods have now been abandoned. Water loss can be prevented by using polyethylene pipes. It is very advantageous to use PE pipes at this time of crisis.



hdpe pipe fittings manufactured in the first class model that are marketed by dealers at higher prices than other PE pipes. Most, however, estimate the price of the PE according to its diameter as well as the type of raw materials used. The types of polyethylene pipes are divided into three groups in terms of their use of raw materials:

  • PE PE 63 pipes
  • PE 80 pipes
  • PE 100 PE Pipes

Of course, these types of pipes are standardized into three types: Grade A, Grade B and Grade C.

PVC Pipe and Fittings Compared with PE Fittings

PVC, also known as PVC, is a polyvinyl chloride resin. Most engineering profiles and produce everyday plastic products, ordinary rains, building materials, plastic films, plastic boxes and so on. But it can only withstand high temperatures of 81 degrees Celsius. PVC pipes are the oldest plastic pipe used and still in operation. The main momentum of the PVC pipe industry was born after World War II. German scientists and engineers have turned to PVC as a material in pipe production that quickly restores water and wastewater piping to damaged cities.


PE is polyethylene. Fresh maintenance film, plastic film etc. are all made of this material. Heat resistance is not strong. Usually when the temperature is over 110 degrees Celsius, the synthetic PE fresh film is melted again, leaving some plastic material that cannot be decomposed by the human body. Moderate air is very good and if the requirements for complete installation and engineering are met, they can be used for many years without any problems or breakage of the pipe. Tubing is a polyethylene pipe in that you actually insert a very flexible tube and these tubes can usually be used for irrigation and irrigation.

electrofusion pipes and fitings installation costs

electrofusion pipes and fitings installation costsElectrofusion fittings are a variety of fittings that can be used in gas pipelines and water supply lines. In electro-fusion joints, the heating method is compared to the butt fusion welding methods and the electric current is used to generate heat. Electrofusion welding is a type of welding of polyethylene pipes and fittings in which special joints with electrical resistance wires are used to create the heat of melting of the welding surfaces.


The electric current is transmitted to the two ends of the connector by means of an electro fusion welding machine and by means of a control box. As with fused-to-welding (butt) welding techniques, a variety of saddle and socket joints are also used in the electro fusion method. The principles of the electrofusion process are uniform and generalizable to most electrofusion joints. This method is the only type of connection approved by the IGS standard for gas transmission lines due to its high safety.


Electrofusion welding does not limit the method of butt welding of polyethylene for pipe connection of similar sizes. Experience has also shown that polyethylene pipes can be bonded to different types of PE in this method. In addition to its safety, other advantages of this method are its high speed and clean connection. But on the other hand, the limitation of this method is the high cost and maximum diameter of the pipe that can be connected to this method. Because of its high reliability, electro-fusion fittings are commonly used in PE gas distribution networks and are economical for pipes with diameters of 20 to 250 mm.


How to announce the plumbing price to the customer is one of the questions that will probably be posed to many people. For this reason, we intend to investigate this further. It is noteworthy that for a variety of reasons it is not possible to announce the price of the pipeline without visiting the project. These include the following:

  • Check hardness
  • Check the project location
  • Check access to work
  • Examine the type of work that is under-roofed or underground

The results of the above mentioned reviews make the plumbing price quite different from one project to the next.


Effects on Plumbing Price:


  • Building Area:

One of the most important parameters in determining the price of a piping is the size of the building. Because naturally the length of the pipes and the complexity of the plumbing system in a 100-meter building are quite different from the plumbing in a 300-meter, multi-unit building.


  • Type of plumbing method:

As you know, water and sewer piping in buildings is no longer the same as it used to be in a traditional, integrated way.


  • building type:

Another thing to consider when calculating the plumbing price is the type of building. Because depending on the type of building, the price of the plumbing also varies.For example, the price of a plumbing in a residential building is quite different from the price of a plumbing in an office or hospital building, which should be announced to the employer after the final project expert visits.


  • Material of pipes and fittings:

As we said today, in addition to changing the way piping works in buildings, the types and types of pipes are also different, and this will change the overall cost of a pipeline project.


  • Pipe fitting:

As you know, the cost of the pipe and fittings required for the building plumbing is borne by the customer and the plumbing operator or utility company has no obligation to pay for the equipment required to carry out the work.

In some projects, the client or the client himself / herself will provide the pipe and fittings for the building, in which case the client will be responsible for all the pipe and fitting work.

In this case, no additional cost should be paid to the plumbing contractor for the supplies required to perform the plumbing and the only cost to be paid is the plumbing fee.


  • Plumber Executor Wages:

Today, plumbing operates in two general and partial ways, known in the market as the counter and clock. However, which method the employer prefers will affect the final price of the piping.