Posts

Iranian PE & PP pipe Fittings at Low Prices

 polypropylene pipes are the most used in the sewage network,. However, due to the advantages of polypropylene over PVC, it is recommended to use polypropylene in the municipal sewage network as well as sewage kits.These tubes are dark or black in color. The thickness and density of PE pipes is higher than PVC pipes. pe fitting is sold in various types.

Iranian PE & PP pipe Fittings at Low Prices

How many types of plastic pipe fittings are there?

How many types of plastic pipe fittings are there?  Since the 1930s, when the Germans first used plastic pipes in building installations and to discharge wastewater, plastic pipes have become widely used today. These pipes have many advantages over metal pipes. Corrosion resistance, low weight, low deposition on the inner surfaces, easier transportation, easy installation of various types of different properties and even more beauty are the most important uses of these pipes over metal pipes. Slow. Needless to say, there are disadvantages to using these pipes, but the variety of their properties can minimize the disadvantages of using a specimen for a particular application.

Plastic tubes are made of organic polymers, which behave differently against heat:

1. Thermoplastics: They are often solid at ambient temperature and become soft and ductile with increasing heat. Many plastic pipe materials include polypropylene (P.P), PVC, polyethylene (PE), thermoplastic. Thermoplastics can be reheated and re-heated.

2- Thermosets: They become soft and formable with increasing heat. They become solid again and harden, but the thermostats cannot be reheated and transformed into other forms. In fact, they are immutable.The properties of plastic pipes depend on the operating conditions, service specifications and fluid used in the raw material.In general, their most important properties are:

  •   Abrasion and corrosion resistance
  •   Smooth interior wall
  •   Heat insufficiency
  •   Insufficient electricity
  •   The density of plastic pipes
  •   mechanical properties

In general, plastics and therefore pipes made of it have good resistance to corrosive liquids and gases such as acids and salt solutions, etc. However, this resistance is directly related to the concentration of corrosive materials, temperature and pipe used. The properties of the plastic pipes are smooth, making their interior wall less sedimentary, avoiding clogging, blockage, and pressure drop. These problems are common in metal pipes, which also cause the rust and taste of liquids inside the pipe.Best plastic pipe fittings must be obtained from the production centers of this product.

As you know, the heat transfer capability of the plastic pipes is very low, which minimizes the heat loss, but it is worth noting that the high expansion coefficient of the plastic pipes is one of the disadvantages of these pipes. . For example, PVC pipes expand at least five times the size of the steel, causing it to twist along the path that needs to be considered, and consider the necessary arrangements, for example, to extend it further. It requires cost. Plastic pipe tolerances vary between 50 and 150 ° C depending on their type.Make poly pipe fittings from different centers of these products.

The insulated plastic pipes are protected against electricity and are completely safe against galvanic corrosion, the most common corrosion problem of buried metal pipes in the soil.

Plastic pipes are much lighter than steel, concrete and cement pipes. Lightweight reduces the cost of shipping and installing them, and speeds up execution by several times.

PE Pipes and Fittings at Factory Price

Polyethylene (PE Pipe) are sorted by strength classified according to the intensity of the earlier technological developments. PE Pipe pressure classes that can be made between Pn4-Pn32 and the production of the desired diameter and size of PE pressure pipe system has undergone many tests in 1950, particularly in the carriage of drinking water. After the result of these tests of PE Pipe, if all reports are positive then it has no harmful effect on human life. One of today’s most widely used pipe is PE piping systems which is  economical, easy in handling, efficient  performance, easy method of coupling. Polyethylene for pipes with advancing technology began to be produced on 1950 II. Polyethylene generation until 1970 and in the 1990s began to be used in the biomedal period polyethylene was formed. Polyethylene should demonstrate excellence in strength and workability is provided by the bimodal polyethylene to accommodate these features  Bimodal Polyethylene known titles can add a few more outstanding features. These are:

  •  Resistance against cracking tube is perfect.
  •  It is spacious and provides a cross-section.
  •  Increases the volume of flow of fluid to pass through the pipe.
  •  Deflection making tendencies are low.

electrofusion fittings uk is sold in various types.Make chep pe fittings from reputable centers for these products.

List of pe fitting manufacturers and producers

List of pe fitting manufacturers and producers Each plumbing must have some of these pocket plumbing tools. Automatic tubes, cutoff tubes, and single-size tubes are also popular, easily cutting most pipes, producing less metal slag and, most importantly, faster performance. This tool can be used in inaccessible areas and is therefore a good choice for the plumbing profession. Circular tubes are not adjustable, so we recommend purchasing copper tubes with regular diameters (8, 10, 15, 22 and 28 mm).

The best piping always requires a customizable piping tool (telescopic tubing). This tool is capable of cutting 6 to 35mm thick pipes. Wherever you can’t handle things with a circular tube, this tool works great. Using a telescopic tube, you will be able to cut the copper tube with minimal metal cutting. It is also equipped with a built-in splitter to clean the piping process.

Adjustable wrenches are a vital tool for any worker, especially a building plumber. Simply adjust the desired size by simply rubbing the tip of the sixty to the desired size and the wrinkled dentin will remain the same. This wrench is used to rotate bolts and fasteners. To make the piping process easier while tightening the edge-to-edge connections of the pipes, the piping requires at least one pair of these wrenches.

Tubular wrench with adjustable capability is considered a suitable tool for a plumber. This wrench works well to open corrupted or broken pipes and fittings. The dentin section is specially designed to fasten the workpiece, and sometimes it is possible to wrap a broken pipe or worn bolts only with this functional tool. In fact, this tool is a necessity for plumbing work.

The pipe wrench (also known as the water pipe wrench, joint wrench and leather handle wrench) is fitted with a removable, adjustable lever and can be used to enlarge and reduce the size of the dentin. The wrenched part of the wrench makes it ideal for fastening and holding plumbing fittings. These types of pipe wrenches have a variety of applications and are very useful tools.

The pliers gas (or lock pliers gas) is an excellent tool for tightening and opening plumbing fittings. Its value is mostly determined when unwinding and twisting bolts. The locking mechanism used in this tool makes it possible to tighten the plumbing fittings so that the plumber can use both hands simultaneously to open the bolts.

The plumbing uses a welding lamp to solder and repair the copper pipes. This tool is important when sealing joints. It is best to buy a high quality welding lamp to produce a strong flame with high heat to repair the pipe and to prevent leakage of construction and industrial plumbing.

 The bending pipe consists of two long arms, two discs, a guide, a roller and a tube. The fastest, easiest and most effective way of bending the pipe is with this plumbing tool. These tools are capable of bending pipes 15 and 22mm in diameter.

Pipes and fittings are not always as easy and simple as we think they are, so spending a little money and buying a high quality saw to cut any type of pipe, bolt and fitting will be very helpful. You can even remove the saw blade and apply it alone with a firm pressure.

Toothpick saws are other plumbing tools and can cut almost anything. The disposable and recessed blade is mounted in a lightweight, rigid frame. Use this tool in tight spaces.

The alignment structure is designed to reflect the horizontal or vertical position of the pipe. These tools are available in various sizes (small, medium or large) and allow access to different levels and alignment. You must always select the largest pipe surface in order to improve accuracy.The mdpe electrofusion machine has many uses today.

Many taps and sockets are fastened with Allen screws. If you have a wrench and a screw size that fits the Allen wrench, this type of fitting is easy to open. Each plumbing must provide one hand of these wrenches. It is suggested to buy the Allen type Hub wrench because they are easier to use in different angles and tight spaces.The price of the plumbing tool depends on the type of application and the size of the pipe used.Epoxy paste is an efficient tool in the bag of professional craftsmen. If you need immediate pipe leak repair, you can use epoxy paste. This is a manual method of repairing pipes and fittings instead of cutting the leaky pipe and installing a new one. This is an easy way to use and almost anyone with any technical experience can use epoxy paste to prevent leaks.

Epoxy paste is basically a two-part paste with equal amounts of component A and B that turns gray after mixing the components. This paste is used to cover seams or crevices

Pe Fitting Suppliers and Manufacturers to work with

The polyethylene pipe manufacturing plant must modernize its machinery and these lines must be equipped with a Gravimetric & Ultrasonic Weight and Weight Control System. The quality control laboratory is an essential part of any PE pipe and fitting plant where laboratory equipment must always be reviewed and calibrated and the laboratory must have NACI 17025 certification.

Laboratory of Polyethylene Tubing Factory has the task of examining the raw materials, the process during production and checking the finished product which has three direct effects on the quality of the finished product and the function of the PE.

Highlights of a PE Pipe Factory:

  • The manufacturer must consider itself responsible for meeting the needs of the highest quality customers.
  • Customer orientation is our motto and customer pride is the priority of customer relationships.
  • The manufacturer values ​​customer time and speeds up its efforts in delivering the best and most quality product and service.
  • The manufacturer designs and offers its products based on customer needs and upgrades with their opinions.
  • The manufacturer commits itself to having the highest quality standards in customer service.
  • The human resources producer considers the most important asset and fundamental factor of organizational excellence.
  • The manufacturer believes in teamwork.
  • The manufacturer considers its success in sustainable development and environmental protection and always considers environmental protection to be of value to itself.

Oldest manufacturers of plastic pipes and fittings

Oldest manufacturers of plastic pipes and fittings In 1954, Frankfurt, Germany, produced the first prototypes of polyethylene pipe making, albeit a very small amount, and this is the beginning of the history of polyethylene pipe. In less than four years, in 1958 production of polyethylene raw materials reached more than 17,000 tonnes worldwide, while in 1962 four years later production increased to 200,000 tonnes.Currently, production of PE raw materials has reached more than 28 million tonnes, about four million tonnes of which is used to produce PE.Oldest manufacturers of plastic pipes and fittings are located in the United Kingdom.

Where to buy PE fittings at factory price?

What is and what is a PE pipe can be said to be a type of pipe that is used to transport liquids with a more liquid nature and sometimes to transfer gas lines. They are hollow, depending on the type of inlet fluid pressure and the amount of discharge, the dimensions and pressures are tailored to the project needs, which are of high strength compared to their similar types. Gas and sheathing and curing of power lines and optical fibers and telecommunications used Therefore, these pipes can be used in all cities and weather conditions do not create any obstacles for these pipes and can be safely used in all water supply, agriculture, drinking and raw water projects and all kinds of cases. The above mentioned optimum use.You can buy all kinds of these tubes from these dealers.suppleirs of pe fittings sell this product in various types.

Plastic Piping & Pipe Fittings Suppliers in Middle-East

Plastic Piping & Pipe Fittings Suppliers in Middle-East Over 50 years of manufacturing the PE pipe and fittings industry in Iran, has the honor of producing and supplying the first Iranian polymer tubes in its repertoire.Plastic Piping & Pipe Fittings Suppliers in the Middle-East manufactures these products in various types and sells them worldwide.durable plastic fittings are manufactured by the best manufacturers of this product in the Middle East.