Traditional water piping has long been used in construction, and it can be said that most buildings have plumbing t fitting been piped in this way in the past. At that time, most of the metal pipes were used for building water piping. However, due to reasons such as high installation wages due to hard work, long-term rusting of pipes, as well as heavy metal pipes, this pipe is no longer used in building water piping.
Plumbing t fitting different dimensions
Plumbing is one of the most important issues in construction, the principled implementation of which increases the life of the building and reduces the cost of damages. The system distributes water pipes throughout the building and provides water for places such as bathrooms, toilets and kitchens. In addition, this system is effective for removing sewage from the building. Different pipes are used for water and sewage piping, each of which has its own advantages and disadvantages. In previous posts, the builder introduced various types of pipes in the building’s plumbing, which will have numerous advantages in meeting the required standards. Standard plumbing is very economical and reduces maintenance costs. In addition, it brings safety to the building and controls the speed of water and sewage in the pipes.
Building plumbing must be done in a completely principled and professional manner, pvc pipe fittings and ignoring the importance of this issue will lead to irreparable disasters.
In general, plumbing is used in various industries and for industrial facilities to transport chemicals, pneumatic and compressed air systems, and urban, industrial, and agricultural water supply networks. Also, one of its main applications is in building plumbing. At this stage, pipes are installed in part of the building to transfer water, gas, as well as to drain kitchen and sanitary wastewater.
For the piping of the building, certain rules and regulations have been considered based on engineering calculations and depending on the geographical conditions of each region, which must be observed by experts in an accurate and principled manner.
Latest price changes of plumbing t fitting
One of the most important steps in building and preparing a building is building plumbing.
Building plumbing is one of the most important steps in the construction of a building that is of particular importance. Not doing the building plumbing system properly can be a problem in the future. Therefore, it should be left to a skilled and expert person. The technical points that must be observed during the piping of the building are:
Care of tools and pipes: Since the piping of the building with the initial stages in construction, is always done, so there is a possibility of damage to pipes and plumbing tools, so to protect these pipes, it is better to put them in a cover and after use the piping route. Cover with cement.
Also, the pipes should not be exposed to sunlight during transportation and operation, so they should be covered with a suitable insulation against light.
Use of sun-resistant tube foam: If the foam of the tube is exposed to sunlight for a long time, it will be damaged, so it is necessary to take care of it against sunlight.
Choosing a horizontal piping path in the floor: If the piping is done in a built-in way, the horizontal paths should be considered only in the floor part of the building and at the end they enter the wall to reach the valves.
tee fitting pvc In order to transfer liquids and gases and sometimes solids in the building, it is necessary to install metal, plastic or cement pipes that are done during the plumbing stage of the building.
In fact, the system of installing pipes and connecting them in the building to distribute water and gas and discharge waste is called plumbing.